GeckoTeq Self-adhesive Dibond & Mirror hanger set (complete with accessories)

The Self-adhesive Multihaak is a hanging system specially designed for flat panels such as mirrors, Perspex, DiBond, Forex, Trespa, plywood, and (acrylic) panels. The most beautiful memories captured on acrylic or Dibond deserve a prominent place on the wall in your home or office.

The The multi-hook set, with a 6kg load capacity each, is easy to install with self-adhesive and offers a secure and nearly invisible system using two wall brackets. Note: These hooks must be mounted on a grease-free surface and are not suitable for fibrous or porous surfaces such as MDF, rough wood, plasterboard, or plaster blocks.

The Multi-hook set consists of:
2 self-adhesive Multi-hooks of 70x70mm or 100x100mm
2 wall brackets,
2 screws,
2 plugs,
4 transparent self-adhesive blocks of 20x20x7.5mm.

Note: Not only the weight of the panel to be hung is important, but also its size. For panels wider than 50cm, a multi-hook of at least 80 x 80mm must be chosen, and for panels wider than 100cm, a multi-hook of at least 100 x 100mm. In addition, each hanger must be able to support the total weight of the object.

The load-bearing capacity depends on many factors, such as the substrate and the material of the (photo) panel itself. It's also very important to thoroughly clean the surface to be covered with an alcohol cleaner and to wait at least 24 hours before hanging the object.