GeckoTeq Self-adhesive tile hanger - 4 load capacities

This tile hanger is designed for hanging tiles or small wall plaques. It has an adhesive layer, making it easy to apply to the back of a tile.

This self-adhesive tile hanger lets you easily hang tiles, ceramic decorations, and other flat objects on the wall without drilling . The hanger attaches directly to the back of the tile with a strong adhesive . You can then hang the tile with a hook, screw, or nail.

The hanger has a compact and sleek design and remains completely invisible from the front. Ideal for decorative wall tiles in the kitchen, hallway, bathroom, or living room.

Advantages

• Self-adhesive : stick on the back of the tile
• No drilling in tiles or walls
• Suitable for smooth, flat backs
• Quick installation and neat finish
• Invisible at the front

Assembly (short)

1. Degrease and dry the back of the tile thoroughly.
2. Remove the protective film and press the hanger firmly .
3. Allow the adhesive layer to harden (preferably) for 72 hours before hanging.

Note: Suitable for smooth surfaces. Clean thoroughly with an alcohol-based cleaner and wait 72 hours before hanging. Not suitable for damp areas.

The maximum load-bearing capacity of the tile hanger is:
30mm = 500 grams
32mm = 200 grams
40mm = 800 grams
60mm = 1,000 grams (1 kg)